Endfeed Fittings
A range of copper and brass fittings end feed fittings for joining copper tube. Simply clean the copper tube and fitting, apply Flux and a heat source until the correct temperature is reached, then add solder from a reel which will run around the joint. Remove the heat source and allow the joint to cool before moving or touching.
- Endfeed Value Pack - 15mm and 22mm£73.05 £87.66
-
-
-
-
-
-
-
-
-
-
-
-
- Endfeed Fitting Reducer - 15mm x 10mm£0.82 £0.98
- Endfeed Fitting Reducer - 15mm x 8mm£0.88 £1.06
- Endfeed Fitting Reducer - 22mm x 15mm£1.27 £1.52
- Endfeed Fitting Reducer - 28mm x 15mm£1.64 £1.97
- Endfeed Fitting Reducer - 28mm x 22mm£1.06 £1.27
Want some advice on how to install your plumbing systems, or interested in finding out more about our product range, take a look at our guides & tips.