How long do PVC fascia boards last?

Whilst all of our UPVC fascias have a manufacturer’s guarantee of at least 10 years, they will often last 20 to 30 years when installed correctly.

Are PVC fascia boards better than timber?

Unlike timber boards, UPVC fascias are a low maintenance roofline option since they are not prone to rotting or warping and do not need to be stained or painted. Instead, PVC boards only need to be wiped down with soapy water once a year or so. So whilst they may be slightly more expensive than timber boards upfront, PVC is actually the more cost-effective option over time.

How are fascia boards measured?

The measurements of all of the fascia boards on our website are measured externally. So for example, on a 150mm wide fascia board, when viewing the cross section, the 150mm width spans the top of the plain end of the board all the way down to the outer side of the return leg.

What is the difference between fascia boards and fascia capping boards?

Standard fascia boards usually measure 16mm-18mm in thickness, whereas capping boards are 9-10mm thick. Whilst both are used as fascia, standard fascia boards are designed to be used as a full replacement of traditional timber fascias, which is why they are sometimes referred to as replacement fascias. Capping boards however are fitted directly onto existing timber fascias that are still in good enough condition, and are mainly fitted for aesthetic purposes.

Flat Fascia Boards

Flat fascia boards are an alternative roofline option to regular plastic fascia boards that don't feature a return leg and instead are completely flat. They are commonly referred to as flat roof fascia boards, as this is the application they are most commonly used for, however, they can also be used on traditional-style buildings with low roofs where rafters are exposed.

Unlike standard uPVC fascia boards, flat boards can be used without any soffit boards on a roofline installation where the rim of the roof does not project from the building and is instead flush with the wall. This is a common occurrence in home extensions or garages.

Our flat fascia boards are manufactured by Freefoam, one of the UK's market leaders in roofline products. Each board carries a 20-year guarantee, is 16mm thick and is BBA-approved. We also offer corner and joint trims to provide neat and seamless installations.