Bullnose Fascia External Corner - 250mm White
|Guarantee||20 Years Manufacturers|
Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.
To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.
Fascia corners can be cut to size with a standard hacksaw or fine toothed saw.
Our bullnose fascia comes in white and is an attractive alternative to our standard fascia offering a more robust option with a traditional, clean finish. White continues to be the most popular with both new build and refurb markets.
The robust and solid system which is manufactured by Kestrel is resistant to climatic extremes due to its waterproof outer skin.
The boards can be installed straight onto the rafters without the need for any other form of rigid backing and the wide range of white and foiled accessories perfectly compliment the range.
Bullnosed fascia also provides another unique advantage in that it can be installed direct to walls or open eaves systems as the back of the board is flush with no return leg. There is a moulded concave section just above the lip which is designed to support the soffit board if used.
Our Kestrel bullnosed 22mm boards carry a Class 1 surface spread of flame rating in accordance to BS 476-7: 1987, while our 16mm boards carry a Class 1 surface spread of flame rating in accordance to BS 476-7: 1997.