Replacement Fascia Bargeboard Finial - 340mm Rosewood
|Dimension||339mm (H) x 99mm (W) x 8mm (D)|
|Guarantee||10 Years Manufacturers|
Bargeboard finials are a more decorative way of covering the joint between the two bargeboards at the apex of the roof.
To enable the bargeboard system to expand and contract correctly in a different range of temperatures, one side of the finial should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.
This rule should be always applied to any corner or joint cover on any PVC fascia installation.
Our standard replacement fascia system is perfect for both new build projects and projects where the replacement of the existing fascia board is needed.
The system is manufactured in the UK by Floplast using state of the art machinery and is durable and rigid with a weatherproof outer skin offering a complete low maintenance solution.
The fascia which can be fixed directly to rafter ends without the need for a timber backing board provide year-round protection from both the weather and insect infestation. The impermeable outer skin and closed-cell composition of the boards is unaffected by moisture and will not rot or corrode.
The fire-resistant system does not burn freely and outperforms timber in a fire. Our FloPlast fascia, cover and soffit boards carry a Class 2Y surface spread of flame rating in accordance to BS 476-7: 1997.