FloPlast Deepflow/ Hi-Cap Gutter Fascia Bracket - 115mm x 75mm Black - Pack of 2
Click or tap the image to open in fullscreen
| Code | RKH1BPK2 |
|---|---|
| EAN Code | 5056919006409 |
| Weight (kg) | 0.120000 |
| Width | 40mm |
| Angle | 0 |
| Brand | FloPlast |
| Colour | Black |
| Dimension | 40mm (W) x 100mm (H) x 129mm (L) |
| Pipe Fit | 0 |
| Guarantee | 10 Years Manufacturers |
| Length | 129mm |
| Height (mm) | 100mm |
| Material | PVC-u |
| Pack Size | Pack of 2 |
| Specification | BS EN 12200 / BS EN 607 |
| System Size | 115mm x 75mm |
| Capacity | 0 |
Fascia brackets, also known as gutter brackets or gutter clips, are the main supports for the gutter system.
The bracket is screwed to the fascia board using two countersunk screws (we recommend 5 x 25mm or 5 x 30mm). The gutter is then clipped in place by first sliding the back edge in under the rear clip and pulling gently down on the front edge to clip the gutter into position.
Deepflow fascia brackets should be spaced at a maximum of 1m centres, although if you live in an area that is prone to heavy snowfall we suggest reducing the centres to a maximum of 800mm and even as close together as 400mm - heavy, regular snowfall snow does exert a large load on a gutter.
You can view our quick PBSL Group product video below;
For information on how to replace a broken fascia bracket, please take a look at this short video guide.
This is a pack of two.
