Drainage Bottle Gully Back Inlet Circular Grid - 110mm - Pack of 10

In stock
Only %1 left
Code
BG540PK10

Click or tap the image to open in fullscreen

Drainage Bottle Gully Back Inlet Circular Grid - 110mm - Pack of 10
More Information
Code BG540PK10
£115.32 £96.10 £11.94
Spend another £1500 to pay over time with Klarna

Bottle gullies are usually used externally alongside the house wall when introducing waste or rainwater pipes into a foul drain.

_x000D_

They can also be used on surface water drains to collect rainwater from paved areas.

_x000D_

You should always check with your local authority before connecting rainwater pipes into a foul drain unless this is an existing situation. 

_x000D_

The top section of any gully should be at least 150mm below the damp proof course level. A Back inlet gully allows new inlets to be connected into an existing drain run. The outlet of this fitting is lower than the inlet to ensure that the air seal is maintained and that there is no backflow. 

_x000D_

Bottle gullies provide a trap that stops foul odours from the underground drainage system from escaping into the air. 

_x000D_

This bottle gully is also roddable. There is a central chamber within the body of the gully that can be removed for cleaning and clearing purposes. 

_x000D_

An RS4 coupling is required to connect the outlet of the gully to 110mm pipe. A single socket bend will also connect onto the outlet if required.

_x000D_

Please watch our overview video below

_x000D_
_x000D_

_x000D_
YOU MAY ALSO LIKE