FREE UK DELIVERY OVER £75
100% SECURE PAYMENT
National Sales 01206 931480
My Account
National Sales 01206 931480

Polycarbonate Sheet End Closures

Sheet End Closures should be fitted to the ends of sheets once the anti-dust tape has been applied to give full protection to the cut edges. The closure incorporates a small lip at the bottom whose pupose is to act as a drip, allowing water to run off into the gutter before it can be blown back under the sheet by forces of wind.

Sheet End Closures should be fitted to the ends of sheets once the anti-dust tape has been applied to give full protection to the cut edges. The closure incorporates a small lip at the bottom whose pupose is to act as a drip, allowing water to run off into the gutter before it can be blown back under the sheet by forces of wind. Read more about Polycarbonate Sheet End Closures

RAFTER-SUPPORTED SYSTEM

Our Rafter-Supported Glazing Bar System is ideal for carports, lean-to's, canopies and conservatories. With this system the PVC snap cap bar is ideal for polycarbonate sheet thicknesses from 10mm to 25mm, whilst the Aluminium screw down bars suit any sheet thickness up to 35mm. 

The rafter-supported system is available in brown and white and the bars are available up to 6m in length.

 

SELF-SUPPORTING SYSTEM

Our Self-Supporting Bar System is available for use with all polycarbonate sheet sizes from 16mm to 35mm. These bars are extremely strong and as a result can support spans of as much as 4m without the need for any additional purlins.

Self-Supporting Eaves beams and Wall plates form the basis of this system, enabling the complete construction of a lean-to or shaped conservatory roof in a single modular system. Bars are available in lengths of up to 6m.

Rosewood and Golden Oak options are available. Please contact us if you need more details on these products.

 

ACCESSORIES

Sheet Edge Trims, Sheet End Closures and other accessories such as breather tape and fixings complete the polycarbonate glazing range. For a brief explanation of the various sheet and bar options available, please visit our Guides and Tips section where you can watch a short explanatory video.

Hide details

Sheet End Closure PVC White 10mm x 2.1M

Sheet End Closure PVC White 10mm x 2.1M

Code: SC10-W Size: 10mm x 2.1m

£5.65 ex.VAT
£5.65 ex.VAT

Sheet End Closure PVC Brown 10mm x 2.1M

Sheet End Closure PVC Brown 10mm x 2.1M

0

Code: SC10-B Size: 10mm x 2.1m

£5.97 ex.VAT
£5.97 ex.VAT
0

Sheet End Closure PVC White 16mm x 2.1M

Sheet End Closure PVC White 16mm x 2.1M

From 1 reviews

Code: SC16-W Size: 16mm x 2.1m Brand: Storm

£5.97 ex.VAT
£5.97 ex.VAT
From 1 reviews

Sheet End Closure PVC Brown 16mm x 2.1M

Sheet End Closure PVC Brown 16mm x 2.1M

From 1 reviews

Code: SC16-B Size: 16mm x 2.1m Brand: Storm

£6.44 ex.VAT
£6.44 ex.VAT
From 1 reviews

Sheet End Closure PVC White 25mm x 2.1M

Sheet End Closure PVC White 25mm x 2.1M

From 2 reviews

Code: SC25-W Size: 25mm x 2.1m Brand: Storm

£6.44 ex.VAT
£6.44 ex.VAT
From 2 reviews

Sheet End Closure PVC Brown 25mm x 2.1M

Sheet End Closure PVC Brown 25mm x 2.1M

Code: SC25-B Size: 25mm x 2.1m Brand: Storm

£6.77 ex.VAT
£6.77 ex.VAT

Sheet End Closure PVC Brown 35mm x 2.1M

Sheet End Closure PVC Brown 35mm x 2.1M

Code: SC35-B Size: 35mm x 2.1m Brand: Storm

£7.91 ex.VAT
£7.91 ex.VAT

Sheet End Closure PVC White 35mm x 2.1M

Sheet End Closure PVC White 35mm x 2.1M

Code: SC35-W Size: 35mm x 2.1m

£7.91 ex.VAT
£7.91 ex.VAT
Back to top

Our Partners

Clark-Drain
Everbuild
FloPlast
FreeFoam
Galeco
Hargreaves Foundry
House Martin
Kestrel
Storm
Tetra Flow